An Active High Pass Filter can be created by combining a passive RC filter network with an operational amplifier to…

By combining a basic RC Low Pass Filter circuit with an operational amplifier we can create an Active Low Pass…

A phase splitter circuit produces two output signals that are equal in amplitude but opposite in phase from each other…

Amplifiers are classified into classes according to their construction and operating characteristics. Not all amplifiers are the same and there…

Class AB amplifier output stage combines the advantages of the Class A amplifier and the Class B amplifier producing a…

Crossover Distortion is a common feature of Class-B amplifiers where the non-linearities of the two switching transistors do not vary…

Class-B Amplifiers use two or more transistors biased in such a way so that each transistor only conducts during one…

Common emitter amplifiers are the most commonly used type of amplifier as they can have a very large voltage gain….

Amplifier Distortion can take on many forms such as Amplitude, Frequency and Phase Distortion due to Clipping. For a signal…

Common Source JFET Amplifier uses junction field effect transistors as its main active device offering high input impedance characteristics. Transistor…

The most common amplifier configuration for an NPN transistor is that of the Common Emitter Amplifier circuit. In the previous…

An amplifier is an electronic device or circuit which is used to increase the magnitude of the signal applied to…

The Diode Clipper, also known as a Diode Limiter, is a wave shaping circuit that takes an input waveform and…

Signal Diodes are small two-terminal which conducts current when forward biased and blocks current flow when reverse biased. The semiconductor…