A phase splitter circuit produces two output signals that are equal in amplitude but opposite in phase from each other…

Frequency Response of an amplifier or filter shows how the gain of the output responds to input signals at different…

Amplifiers are classified into classes according to their construction and operating characteristics. Not all amplifiers are the same and there…

Class AB amplifier output stage combines the advantages of the Class A amplifier and the Class B amplifier producing a…

Crossover Distortion is a common feature of Class-B amplifiers where the non-linearities of the two switching transistors do not vary…

Class-B Amplifiers use two or more transistors biased in such a way so that each transistor only conducts during one…

Common emitter amplifiers are the most commonly used type of amplifier as they can have a very large voltage gain….

Amplifier Distortion can take on many forms such as Amplitude, Frequency and Phase Distortion due to Clipping. For a signal…

Common Source JFET Amplifier uses junction field effect transistors as its main active device offering high input impedance characteristics. Transistor…

The most common amplifier configuration for an NPN transistor is that of the Common Emitter Amplifier circuit. In the previous…

An amplifier is an electronic device or circuit which is used to increase the magnitude of the signal applied to…

Transformer voltage regulation is the ratio or percentage value by which a transformers output terminal voltage varies either up or…

Audio Transformers are designed for use in audio amplifier applications for coupling and impedance matching of amplifiers and speakers. As…

Three-phase Transformers are the backbone of electrical power distribution whether Delta or Star connected windings. Thus far we have looked…